Highly Rated

2225 Easy Control Bradoon double broken

Name: 2225 Easy Control Bradoon double broken
Brand: Stübben
Price: 69.0 EUR
Availability: InStock

€69,00 EUR

Duties and taxes included. Shipping calculated at checkout.

Width : 5"·12,5cm

5"·12,5cm
5 1/4"·13,5cm
5 3/4"·14,5cm
4 1/2"·11,5cm
4 1/8"·10,5cm

Thickness : 12 mm

12 mm

Material : stainless steel

stainless steel

Product variants

In Stock - Ready to ship

Verified payment
Cost-free returns

The 2225 Easy Control Bradoon double broken functions as a snaffle under light rein contact but converts into a bar bit under strong, bilateral pressure. Serving as part of a double bridle (used together with a curb), it also works solo for horses or ponies with limited mouth space. The double joint distributes pressure evenly over the tongue and bars, while the loose rings allow the bit to settle neutrally in the horse’s mouth.

Description

The Stübben SteelTEC Easy Control bits are activated by strong, bilateral pressure from the horse, turning them into a bar bit. With normal contact with the reins and as soon as the rider or the horse relaxes, the bit becomes flexible again and can be used like a regular snaffle bit. This allows for precise yet mouth-friendly aids when needed.

Thanks to the effect of the Easy Control bit, horses often learn to hold back on their own as soon as the bar effect kicks in. Therefore, Easy Control bits should be used for training purposes for short periods, with regular checks to see if the desired learning effect has been achieved.

As a bradoon, this bit is used in conjunction with a curb bit. However, it can also be used as a snaffle bit for horses that anatomically have less space in their mouth or as a pony bit. The double-jointed mouthpiece distributes pressure evenly over the tongue and bars. The loose rings allow the bit to find a neutral position in the horse’s mouth.

Advantages at a Glance

Effect:
When the horse applies strong pressure forward on both reins, the bit acts like a bar. As soon as the horse or rider relaxes (on one side), the bit acts like a double-jointed snaffle.

Mouthpiece:

Made of stainless steel
Stainless steel is robust, tasteless, and odorless

Which horses are particularly suited for this bit?

Horses that become stronger in certain situations
Horses that pull strongly on the reins
Horses that become too cautious with leverage bits or similar

Note on Proper Use

Any bit can cause pain if used roughly and improperly. An incorrect size can also be painful for the horse. Please contact us if you have questions about size and fastening, or read more here about choosing the right size and proper fastening in the horse’s mouth. Please ensure that Easy Control bits are regularly switched out to check for the desired training effect.

Dimensions:

- Width: 10.5 / 11.5 / 12.5 / 13.5 / 14.5 cm
- Ring Diameter: 55 mm
- Thickness: 12 mm

Size Guide

Measure your horse’s mouth width by placing a bit sizer, string, or dowel between the corners of the lips (at the position where the bit will sit), mark the ends, then measure the distance.

The bit width should be such that the rings rest just outside (or very slightly beyond) the lip corners—if the bit is too narrow, it will pinch; too wide, it will shift side to side.

For loose ring bits, allow a little “play” so the rings can rotate freely without pinching the lips.

When mounted in the bridle, the bit should sit such that there is 1–2 small wrinkles at the corners of the mouth (but this is not a perfect rule for all jointed bits)

The bit should lie on the bars (the toothless gap between incisors and molars) and not press into teeth or interfere with the palate.

Width: 10.5 / 11.5 / 12.5 / 13.5 / 14.5 cm - Ring Diameter: 55 mm - Thickness: 12 mm

Composition

Stainless steel

Care Instructions

Washing
After each ride, rinse or wipe the bit to remove saliva, feed residues, or sweat. Use lukewarm water and, if needed, a mild, pH-neutral detergent or saddle soap. Avoid harsh chemicals or abrasive cleaners, as they can damage the metal surface and reduce the bit’s longevity.

Drying
Once cleaned, dry the bit thoroughly with a soft cloth. Allow it to air dry completely before storage. Do not expose the bit to direct sunlight, and never place it on or near heat sources such as heaters or radiators.

Storage
Store your bit in a dry, well-ventilated environment, protected from moisture and temperature fluctuations. For best results, keep bits individually or padded to prevent metal parts from rubbing or scratching each other. Avoid leaving the bit attached to the bridle for extended periods, especially in humid conditions.

Guidance

Any bit can cause pain if used roughly or improperly. The wrong size can also be painful for the horse. Equal rein pressure activates the bit’s temporary bar effect, offering added stability and precision. Releasing the reins restores full mobility for gentle, responsive contact. For correct use, the bit should be employed with steady, even contact, not with abrupt or excessive rein aids. It should be used for training or transitional work in short sequences; overuse may reduce its intended educational effect. Can be used as a double bridle, when used together with a curb.